Sony HDW-790 Operation Manual page 164

No. Page
M15 FUNCTION 3
M16 FUNCTION 4
M17 GENLOCK
M18 ND COMP
164
Menu List
Item Settings
WHT FILTER INH OFF/ON
COLOR BAR SEL SMPTE/100 %/75
%/4:3-1/4:3-2/4:3-3
SHT DISP MODE SEC/DEG
RM COMMON OFF/ON
MEMORY
VTR START/STOP RM/PARA/CAM
FAN OFF/ON/AUTO
USER & ALL ONLY OFF/ON
HD SDI REMOTE OFF/CHARA/G-
I/F TLY/R-TLY
SD ASPECT OFF/ON
3), 4)
PULSE
WHITE GAIN WIDE/NRW
RANGE
GENLOCK OFF/ON
RETURN VIDEO OFF/ON
GL H PHASE (–99 to 99)
COASE
GL H PHASE FINE (–99 to 99)
ND OFFSET OFF/ON
ADJUST
CLEAR ND —
OFFSET
Default Description
OFF Turns the function which inhibits independent
white memory for each filter position on and
off.
100 % Selects the color bar type.
SEC Selects whether to display the shutter speed
in seconds or degrees.
ON Selects whether or not to share settings when
an RM remote control unit is connected and
when the camcorder is used alone.
RM Selects which VTR START/STOP buttons (on
the RM, camera, or both) are enabled when
an RM-series remote control unit is
connected.
ON OFF: Stops a fan operation.
AUTO: Stops a fan operation while the VTR of
the camcorder is recording.
OFF Selects whether to show only USER, USER
MENU CUSTOMIZE, and ALL menus in the
top menu.
OFF Selects the setting when recording as
synchronizing with multiple HDW-S250/S280
cassette recorders by superimposing the
trigger signal on the output signal from the
HD-SDI OUT connector.
OFF: Does not carry out synchronous
recording.
Selects the display method when the
recording trigger signal is output from the HD-
SDI OUT connector (when an HDW-250/
S280 is recording).
CHARA: REC 2 is displayed on the display
section of the viewfinder.
G-TYL: The green tally is turned on.
R-TLY: The REC tally is turned on. Pay
attention to the fact that this REC tally is lit
even when a cassette is not loaded in the
camcorder.
OFF Selects whether the 16:9 (SQEZE) signal is
superimposed on the VBS/SDI output signal
from the HD-SDI OUT connector located on
the side of the camcorder when an optional
HKDW-702 is installed.
WIDE Specifies the settable range of white gain.
WIDE: –30 dB to +7 dB
NRW: –7 dB to +7 dB
ON Turns genlock on and off.
OFF Turns return video on and off.
0 Adjusts the genlock H phase.
0 Adjusts the genlock H phase.
— Turns the mode which sets ND (neutral
density) filter color compensation values on
and off.
EXEC Clears ND filter color compensation values.
2)