Table of Contents
Advertisement
USER
No.
Page
menu
21
UMID SET
1) This item is displayed when an optional HKDW-702 is installed.
2) When either 50i or 25PsF is selected, this item is not displayed.
3) When 59.94i is selected, the maximum setting is 7SEC.
When either 50i or 25PsF is selected, the maximum setting is 8SEC.
4) When 59.94i is selected, the maximum setting is 40 MIN.
When either 50i or 25PsF is selected, the maximum setting is 48 MIN.
5) This item is displayed when an optional HKDW-905 is installed.
6) The shutter speed depends on the selected frame frequency. See "4-2-1 Shutter Modes" on page 62.
7) When either 50i or 59.94i is selected, OFF is the default setting.
When 25PsF is selected, 1/50 is the default setting.
8) When Y is selected in the camcorder with an optional HKDW-702, the color signal is output from the connector whose selected output signal is an SD signal.
PAINT Menu
The following table lists and describes the items in the
PAINT menu.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
No.
Page
Item
P01
SW STATUS
GAMMA
BLACK GAMMA
MATRIX
KNEE
WHITE CLIP
DETAIL
APERTURE
FLARE
EVS
TEST SAW
Item
Settings
EX-OWNERSHIP REC
OFF/ON
COUNTRY CODE
4 alphanumeric
characters
ORGANIZATION
4 alphanumeric
characters
USER CODE
4 alphanumeric
characters
INSTANCE NO
RND/GEN
TIME ZONE
00 to 25, 1A to 1F, 2A
to 2F, 32, 3A to 3F
MACHINE
n
Settings
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
ON/OFF
OFF/ON
OFF/ANALG/
DIGIT
Default
OFF
—
—
—
RND
00
—
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
Default Description
ON
Turns the gamma correction on/off.
OFF
Turns the black gamma correction on/off.
OFF
Turns the linear matrix correction on/off.
ON
Turns the knee correction on/off.
ON
Turns the white clipping correction on/off.
ON
Turns the detail signal on/off.
ON
Turns the aperture function on/off.
ON
Turns the flare function on/off.
OFF
Turns the EVS shutter on/off.
OFF
Selects the test signal.
Description
See "5-3-8 Using AMID Data"
on page 100.
Menu List
151
Advertisement
Table of Contents
