Smooth Fitness CE-3.0 XT User Manual page 19

ASSEMBLY
STEP 9:Roller Alignment
(A) Take the 4 alignment bars and place them on the aluminum rail on either
side of the rubber roller, with the orange marker facing towards the rear of
the machine (see Fig.9A) there should be 2 alignment rods on the left
side and 2 alignment rods on the right side.
(B) Both the left and right rollers should be in the center of the rods. If the
rollers are off center adjust the upright tube by slightly twisting it to the left
or right to align the rollers. (Fig. 9B)
(C) When the rollers are centered, tighten the bolts that were left loose in
steps 3, 4, and 5. (Fig. 9D)
(D) Recheck that all bolts are tight and rollers are centered
(E) Store the alignment rods for later use.
Fig .9A
Fig .9C
www.smoothfitness.com
*
*
Fig .9B
Fig .9D
19
4
1