Smooth Fitness CE-3.0 XT User Manual page 17

ASSEMBLY
STEP 7:Attach the Second Pedal Support Tube Assembly
(A) Place the left second pedal support tube assembly on top of the pedal
support tube and align the rubber roller on the center of the #113
aluminum rail.
(B) Insert the "U" bracket over the preassembled #98 short square swing arm
(C) Insert the #14 small axel through the #102 "U" bracket and #98 short
square swing arm
(D) Secure the #14 small axel by using 2 x #11 washers and 2 x #12 lock
nuts.
(E) Completely tighten the large bolts and cover with 2 x #5 protective caps
(F) Repeat the process above for the right side.
NOTE: Due to the tight tolerance of part #102 and #98 it may be
easier to install put part #11 washer and #12 nut on one side of
the # 14 small axel and twist the axel through the part #102 and
#98.
www.smoothfitness.com
#12
#5
#14
#11
17
4
4
2
4