Smooth Fitness CE-3.0 XT User Manual page 13

ASSEMBLY
STEP 3: Attach the Stride Adjuster to the Upright Tube
! Caution Pinch Point: Do not pinch the wires between the frame!
(A) Lay the upright tube on the floor as shown below
(B) Locate and connect the stride adjuster signal wires. (The wire may be
inside the upright tube.
(C) Align the bolt holes in the stride adjuster and the upright.
(D) Secure the Stride adjuster to the upright by using 4 x #18 Allen head bolt.
(E) Hand tighten only do not tighten until step 9
www.smoothfitness.com
#18
13
4