Adjusting Individual Jet Flow; Adjusting Powerpro™ Mx2 Jets; Adjusting Rx Jets; Watercolour™ Waterfall Control - Jacuzzi J - 415 Owner's Manual

3. To increase or decrease light intensity, use the Quad Keypad as
follows:
• Press the Up button to increase the intensity in 25% increments.
• Press the Down button to decrease the intensity in 25% increments.
Note: The intensity range is from 25% to 100%, in increments of 25%.As
the intensity is increased the bulb will darken to reflect the effect (Figure
D, page 58). Intensity defaults to the last setting used.
4. Press button A to deactivate the light rotation mode and select a solid
color (the last color and intensity used).
5. Press button C to turn off the interior lights.
6. Press button D to return to Main Menu.
11.4

Adjusting Individual Jet Flow

The water flow to certain jets in your spa can be increased or
decreased by rotating the outside jet face.
Note: Always keep at least 6 adjustable jets open at all times.
11.5 Adjusting PowerPro™ MX2 Jets
Tilt PowerPro MX2 Jet nozzle to angle of choice as desired.
Rotate nozzle clockwise to reduce flow volume from jet or
rotate counterclockwise to increase flow volume.
Note: Always keep at least 6 adjustable jets open at all times.
11.6

Adjusting RX Jets

Turn center jet adjustment knob clockwise to decrease or
shut off water flow. Turn center jet adjustment knob
counterclockwise to turn on or increase water flow.
Note: Always keep at least 6 adjustable jets open at all times.
11.7 WaterColour™ Waterfall Control
Turn waterfall control valve (pages 23-40) counterclockwise
to increase waterfall output. Turn control valve clockwise to
decrease or turn off waterfalls.
11.8

Air Controls

Certain jet systems have their own air control. Each control
introduces air into the water lines that supply that specific jet
group (pages 23-40). Simply rotate any air control clockwise
to open or rotate counterclockwise to close. To minimize heat loss, all air
controls should be closed when the spa is not in use.
J-400
Page 59