Activate Jet Pumps; Multi-Colored Led Light System Operation; Adjusting Individual Jet Flow - Jacuzzi J-135 Owner's Manual

10.2

Activate Jet Pumps

The control panel JETS 1 button activates jets pump 1. The
first press activates low speed, the second press activates high
speed, and the third press shuts jets pump 1 off. The JETS 2
button activates jets pump 2 (if equipped). The first press activates high
speed, the second press turns jets pump 2 off. When manually activated,
either pump will automatically turn off after 20 minutes.
10.3

Multi-Colored LED Light System Operation

The multi-colored LED light system offers seven constant color
variations and three unique random modes for enhanced spa
enjoyment. Press the Light button once to activate the first light
mode, then continue pressing the button to either turn the light off or to
select one of seven constant colors or random solid color mode as
illustrated below.
Note: Anytime the spa light is manually activated, it will remain on for 2
hours then automatically shut off.
1st press
2nd press
3rd press
4th press
5th press
6th press
7th press
8th press
9th press
10th press
11th press
10.4

Adjusting Individual Jet Flow

The water flow through certain jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Other
jets also offer an adjustable center nozzle that allows
you to change the water discharge angle. Simply tilt the
center nozzle in these jets to the desired angle to customize
your personal massage.
Note: Always keep at least 6 adjustable jets open at all
times to ensure proper filtration characteristics within
spa.
high speed blend mode
low speed blend mode
freezes low speed blend mode
solid Blue color
solid Violet color
solid Red color
solid Amber color
solid Green color
solid Aqua color
solid Near White color
returns to high speed blend mode
J-100
1
2
Classic Whirl Jet
Classic Luxury Jet
27