Jacuzzi J - 415 Owner's Manual page 70

J-400
4. Press the Splash button to save settings. Then the display will revert
to the Program A menu (Figure I).
5. Press the Down button on the Quad
keypad to select "Start Time" (Figure
K). Press the Left or Right button on
the Quad Keypad to select the time
you wish the spa to run. Press the
Down button to access the "Duration"
submenu.
Note: If you are using a standard 12-Hour
period, you will see the hour displayed as "1PM." For the 24-
Hour period it will read "1300."
6. Now you will need to adjust the
cycle "Duration" (Figure L). Cycle
duration range is adjustable from 0
(OFF) to 6 hours. Press the Left or
Right button on the Quad Keypad to
make adjustments in increments of 1
hour.
Note: The default "Duration" is OFF.
7. Press the Splash button on the Quad Keypad to save your changes
and return to the Heating Menu. At this point you can program a
Secondary Heating Mode (Program B) or press button B to enter the
"Settings 2" Menus (Section 13.0, page 67).
B. Program B Heating Mode
1. To program the Secondary Heating
mode press the Down button on the
Quad Keypad to access the "Program
B" (Figure M) settings. Press the
Splash button to enter the submenus
for Program B.
2. From this menu (Figure N), you can
set the days, times, and duration.
With "Day Settings" selected, press
the Splash button on the Quad
Keypad to confirm selection.
Page 64
PROGRAM A
Day Settings
Start Time Start Time
Duration
A
Press to Save
2
PROGRAM A
Day Settings
Start Time
Duration Duration
A
Press to Save
2
PROGRAMS
Program A
Program B Program B
Press to Enter
2
PROGRAM B
Day Settings Day Settings
Start Time
Duration
B
2 Press to Set
1PM
Select
OFF
Figure K
1PM
Select
OFF
Figure L
Select
B
Figure M
1PM
Select
OFF
Figure N