J-1000 Wireless Remote Battery Replacement - Jacuzzi J - 415 Owner's Manual

J-400
20.2

J-1000 Wireless Remote Battery Replacement

1. Turn the remote unit over and locate the battery
door (Figure A).
2. Remove the six screws securing the door.
3. Remove the battery door. You could use a small screwdriver to pry
the door upward.
4. Replace or install 3 AAA batteries.
5. Reinstall the battery door and screws.
Note: Remote unit is water resistant not waterproof. Although it is
designed to be used while in the spa, it should never be left in the spa
while the cover is on and spa is not in use. The remote should be stored
in a dry location such as the stereo remote pouch (if applicable) located
on the outside of the spa cover or within your home. Extreme weather
can affect the remote control battery. In extreme hot or cold environments
store the remote control indoors to prolong battery life.
Page 102
Figure A
Figure B
Figure C