Removing/Installing Standard Back Upholstery - Invacare Action 1 NG Service Manual

SECTION 4—SEAT/BACK
1. Fold the wheelchair.
2. Remove the height mounting screws and washers that secure the existing seat upholstery
to the cross braces.
3. Remove the existing seat upholstery from the cross braces.
4. Install new seat upholstery by reversing STEPS 1-3.
FIGURE 4.2 Removing/Installing Seat Upholstery

Removing/Installing Standard Back Upholstery

NOTE: For this procedure, refer to FIGURE 4.3.
Re movi ng Ba c k Upholste r y
NOTE: To Install the Back Upholstery, reverse this procedure.
1. Remove the back canes. Refer to Removing Back Canes paragraph.
2. Remove the mounting screw that secures the back upholstery to the back canes.
Refer to Detail "A".
3. Remove the back upholstery from the back canes. Refer to Detail "B".
DET AI L " A"
D E T AI L " B "
Upholstery
Back Cane
FIGURE 4.3 Removing/Installing Standard Back Upholstery
1 3