Download Print this page
Sekonic LITEMASTER PRO L-478 Series Startup Manual
Sekonic LITEMASTER PRO L-478 Series Startup Manual

Sekonic LITEMASTER PRO L-478 Series Startup Manual

Light meter
Hide thumbs Also See for LITEMASTER PRO L-478 Series:

Advertisement

Quick Links

LITEMASTER PRO
L-478 Series
Startup Guide
Thank you for purchasing LITEMASTER PRO L-478 Series.
This Startup Guide introduces the basic operations of this light meter.
For details about how to use this light meter, please see the Operating
Manual.
1. Download
Please visit
www.sekonic.com
of DTS software and the operating manual as follows:
■ Data Transfer Software (DTS)
http://www.sekonic.com/support/downloads/
dtssoftwareformacandwindows.aspx
■ Operating Manual
http://www.sekonic.com/support/instruction
manualuserguidedownload.aspx
2. Check Included Items
The following items are included with the meter in the package.
Please be sure to check that all noted items are included.
★ If any items are missing, please contact the distributor or the reseller you
purchased the meter from.
★ Batteries (2 AAA) are not included in the package. Please obtain these separately.
Meter
Startup Guide
( this document )
to download the latest version
Soft Case
LITEMASTER PRO
L-478 series
English
Startup Guide
Light Meter
Deutsch
Startanleitung
Lichtmessgerät
Guide de démarrage
Français
Posemètre
中文
测光表
使用简介
Guía de inicio
Español
Fotómetro
Guida introduttiva
Italiano
Esposimetro
日本語
露出計
スタートアップガイド
Light Meter
Strap
English
<DTS>
<Manual>
Anti-glare
film
Precaution
 For Proper Operation
Before using this product, please read this "Safety Precautions" for
proper operation.
 General Safety Information
• Read the Operating Manual before use.
• Keep the Operating Manual on hand for reference at any
• Stop using this product when there are any abnormalities.
• Do not attempt to repair this product by yourself.
• This product is intended only for persons with expert
• Monitor children so that they do not touch this product.
• Use this product in a usage environment described in the
• This product is not waterproof.
Safety
English
WARNING
There is a danger of electrical
Safety Precaution
voltage strobes.
Avoid contacting the terminals
This product emits electromag
Do not bring this product close
pacemakers.
Do not use this product in an e
The WARNING symbol indicates the
WARNING
Use of devices emitting electro
possibility of death or serious injury if the
prohibited in hospitals.
product is not used properly.
CAUTION
The CAUTION symbol indicates the
CAUTION
possibility of minor to moderate personal
injury or product damage if the product is
• Check the material of the neck strap
not used properly.
risk of allergy.
• Be careful of sudden emission of ligh
The NOTICE symbol indicates cautions
or restrictions when using the product.
NOTICE
NOTICE
Please read all notes to avoid errors in
operation.
• Do not leave this product on car dash
This may damage the product.
• Remove the batteries when this prod
long period of time.
• When the desired performance is not
time.
this product and contact the service c
 Information for Users on Colle
Disposal of Old Equipment
knowledge.
To protect environment, do not
and batteries away with the nor
at the end of those life, but brin
Operating Manual.

Advertisement

loading

Summary of Contents for Sekonic LITEMASTER PRO L-478 Series

  • Page 1 Light Meter LITEMASTER PRO L-478 Series Startup Guide Thank you for purchasing LITEMASTER PRO L-478 Series. This Startup Guide introduces the basic operations of this light meter. For details about how to use this light meter, please see the Operating Manual.
  • Page 2 3. Names of Parts Front View Rear View Bottom View Strap eyelet Lumisphere retracting ring Synchro Lock lever terminal Lumisphere Battery Cover Open Measuring Touch panel L- 47 8D MO DE L button(*1) AT IO N CO RP OR SE KO NI C PH ILI PP IN MA DE IN 0 0 0 1...
  • Page 3: Setting Measuring Mode

    5. Setting Measuring Mode Different measuring modes can be selected to meet various requirements. In the custom setting, you can select whether to display or hide ★ the measuring modes. [Measuring Screen] [Measuring Mode Selection] Currently selected measuring mode Return to measuring screens after selecting any of icons.
  • Page 4: Menu Screen

    6. Tool Box Screen The following settings can be made by selecting the Tool Box ) from the Measuring screen. [Tool Box Screen] • Filter Compensation Setting • Radio Channel / Zone (Group) Setting (*3) for L-478DR Series only • Memory Clear (*3) •...