Shutter Angle Editing - Sekonic Litemaster Pro L-478D Operating Manual

Edit screen. (Touch [Cancel] if editing is not
needed.
7) Press the Menu button
Menu screen.
8) These customized frame rate will appear
to the tail end of the selection order in the
f/s setting icon in the Measuring screen for
HD CINE mode and CINE mode.(From 1 to
1000 f/s are standard available frame rates,
and after 1000f/s, customized frame rates
appear.)

6-6-6. Shutter Angle Editing

In addition to the standard shutter angles available in the L-478D/DR, up to 20 shutter
angles can customized and displayed in the meter screen.
* Shutter angle is set in 0.001° step over a range from
0.001 to 360°.
1. Press the Menu button
P21 for details.) to open the Menu screen.
2. Touch [7. Edit Shutter Angle] to display
Select Shutter Angle to Edit screen.
3. Touch the check box
customized shutter angle in the ANG setting
icon in the Measuring screen for CINE mode. (A
check mark
for use. To deactivate the frame rate, touch box
again to return to ❑.)
4. Touch ▲/▼ or slide finger on bar to select
shutter angle and touch one of the shutter angle
button to display Input Shutter Angle screen.
5. Touch buttons on the keypad to input the
value of shutter angle (See P13 for details on
inputting.)
6. Touch [OK] to return to Select Shutter Angle
to Edit screen. (Touch [Cancel] if editing is
not needed.
7. Press the Menu button
Menu screen.
8. These customized shutter angle will appear
to the tail end of the selection order in the
ANG setting icon in the Measuring screen
for CINE mode.(From 1 to 358° are standard
available shutter angles, and after 358°,
customized shutter angles appear.)
7
to return to the
7
on the meter. (See
to display the
indicates shutter angle is available
7
to return to the
Select Shutter Angle to Edit
Check to display or not in the
Shutter angle setting in the
Input Shutter Angle Screen
59
Screen
Measuring Screen