4) Factory Setting
1. Touch the ⑥[Factory Setting] in the Hardware
Setting screen to display the Factory Setting
Confirmation screen.
2. Touch the [Yes] to proceed factory setting
(Touch the [No] if factory setting is not
needed.)
3. Touch the [Yes] in the Final Confirmation
screen to complete the setting and return to
Measuring screen.
(Touch the [No] if factory setting is not
needed and return to Hardware Setting
screen.)
5) User Information Editing
1. Touch the [Edit User Info] in the Hardware
Setting screen to display the keypad to input
user information.
2. Currently set information (characters) appears at
the top of screen.
Up to 31 characters can be entered (See P13 for
details.). Touch the ⑦[OK] to complete the input
and return to the hardware Setting screen.
3. Input user information will be displayed on
the Information screen.
Factory Setting Confirmation
Final Confirmation Screen
Edit Use Information Screen
64
Screen