Average Function - Sekonic Litemaster Pro L-478D Operating Manual

6-3. Average Function

Up to nine memorized measurements can be averaged and the result displayed.
This function can be used in all modes except Illuminance/Luminance measuring and
Multiple (cumulative) Flash modes.
1. Press the Measuring button
2. Press Memory button
The memorized value will also appear on the analog scale.
3. Repeat steps 1. and 2. to remeasure and memorize up to nine values.
4. Touch the Average icon
the result on the Digital display as well as Analog Scale.
"AVE" will appear on the screen and Average icon
Measuring screen is displaying an Averaged Value.
5. Touch the Average icon
value last measured.
Measuring Screen
(after memory)
Memorized measurements (f-stop)
8
on the side of meter to take a measurement.
5
to memorize the measured value.
at the bottom of the screen to calculate and display
again to return the Measuring screen value to the
Setting
value
Measuring value
(f-stop)
49
in reverse to indicate the
Measuring Screen
(Average)
Averaged values