Front Trim Removal / Installation; Inner Panel Removal / Installation - Regency GF900L-NG Owners & Installation Manual

INSTALLATION
1. Remove faceplate, inner door frame, and glass door if already installed - see instructions in this manual.
2. Remove two (2) screws in locations shown below to remove front trim piece.
3. Reverse steps to reinstall.
Front Trim Piece
1. Remove front trim piece - see instructions above.
2. Remove two (2) screws in locations shown below to release panel clips.
Panel Clip Screw
34

FRONT TRIM REMOVAL / INSTALLATION

Diagram 1 - Front Trim Screw Locations

INNER PANEL REMOVAL / INSTALLATION

Locations
Panel Clip
3. Remove panels by sliding out.
4. Reverse steps to reinstall.
Regency GF900L Gas Fireplace