Table of Contents
Advertisement
PRIOR TO VALVE TRAY REPLACEMENT, ENSURE UNIT
HAS COOLED TO ROOM TEMPERATURE, ALL POWER IS
DISCONNECTED AND GAS SUPPLY IT TURNED OFF.
1. Remove faceplate, inner frame, glass door, front trim piece and inner
panels - see instructions in this manual.
2. Remove logs.
3. Remove burner side panels by lifting out as shown in Diagram 1.
Diagram 1 - Burner Side Panels
4. Remove burner by removing 2 screws in locations shown below.
Diagram 2 - Burner Screw Locations
5. Remove rear log tray by removing 3 screws as shown in Diagram 3
below.
Diagram 3 - Log Tray screws
Regency GF900L Gas Fireplace
VALVE TRAY REPLACEMENT
6. Remove burner by removing 14 screws in locations shown below.
7. Lift out valve tray.
8.
Diagram 4 - Valve Tray Screw Locations
Diagram 5 - Valve Tray Removal
Replace valve tray and reverse steps.
MAINTENANCE
43
Advertisement
Table of Contents
