Front Trim Removal / Installation; Inner Panel Removal / Installation - Regency GF900C-NG Owners & Installation Manual

1. Remove front trim piece - see instructions above.
2. Remove two (2) screws to remove to panel clips and release back panel,
lift panel up and out to remove.
3. Remove two (2) screws in locations shown below to release panel clips.
4. Remove 3 screws in locations shown below to remove burner tray.
Panel Clip and Burner Tray
Screw Locations
Regency GF900C Gas Fireplace

INNER PANEL REMOVAL / INSTALLATION

Panel Clip
4. Remove panels by sliding out.
5. Reverse steps to reinstall.
INSTALLATION
33