System Menu - Roland V-40HD Owner's Manual

Menu Operations and Menu List

System menu

The settings for items shown in gray in the table are not saved to MEMORY buttons (1-1 through 5-5). You cannot save multiple settings for these
items using the MEMORY buttons. Only one setting per item can be saved to the V-40HD's internal memory. Such settings are saved when you exit
the menu. So don't turn off the power while the menu is displayed.
HDCP [OFF], ON
Frame Rate [59.94Hz], 50Hz
Panel Mode A/B, [PGM-PST]
Source Assign OFF, [PGM Select],
Mode PST Select
NTSC Setup Level [0IRE], 7.5IRE
AUTO OFF OFF, [ON]
Memory Switch
OFF, [ON]
Fade
Memory Protect [OFF], ON
MIDI Pressing [ENTER] changes to a detailed setup screen for MIDI.
Output Fade Pressing [ENTER] changes to a detailed setup screen for output fade.
PVW Label Pressing [ENTER] changes to an editing screen for PVW labels.
This makes settings related to USB memory devices.
USB Memory Parameter
Format
LED Dimmer 0 - [7]
Video Fader
Pressing [ENTER] changes to a calibration screen for the video fader.
Calibrate
Menu Background 0 - [4] - 7
Menu Position [Left], Right
[OFF],
Color Bar 75%,
Test Pattern
Color Bar 100%,
Ramp, Step, Hatch
Factory Reset This returns the V-40HD to its factory-default settings. Pressing [ENTER] displays a confirmation screen.
Detailed setup for MIDI
Status OFF, [Native], V-LINK Master, V-LINK Slave, MVC Slave
Through Output [OFF], ON
Channel [1] - 16
Detailed setup for output fade
Time 0.0s - [0.5s] - 10.0s
Audio Follow OFF, [ON]
Color Setting Use the following items to make settings related to the output fade color.
Red 0 - [16] - 255
Green 0 - [16] - 255
Blue 0 - [16] - 255
50
This turns the HDCP mode on/off. A confirmation screen appears when [ON] is selected.
This selects the system frame rate.
This selects the operation mode. For PGM-PST and A/B, see p. 28 and p. 31.
This changes the operation mode of the input assign buttons (p. 19).
This selects the NTSC IRE level.
* An IRE is a unit used in the measurement of composite video signals and in particular this controls
black level setup. Typically 7.5 is used in US broadcasts while 0 is used in Japan.
When AUTO OFF is set to ON, the power is turned off after 240 minutes.
When ON, this will automatically engage an output fade between memory selections.
When ON, this disables the ability to save to MEMORY buttons.
Pressing [ENTER] lets you set parameters related to saving to/loading from a USB memory device.
Pressing [ENTER] changes to a formatting screen for the USB memory device.
This adjusts the brightness level of the top panel LEDs.
This sets the transparency of the menu background.
This changes the position of the menu display. You can also change this by holding down the [MENU]
button and pressing the left or right [CURSOR] button.
This turn off or turns on a selected test pattern.
This selects the MIDI remote-control mode of the V-40HD.
This selects the operation of the MIDI OUT/THRU connector.
This selects the MIDI channel to use when Native is selected.
This sets the duration of the fade.
This selects whether audio volume is interlinked with output fade.
This sets the red level.
This sets the green level.
This sets the blue level.