Connecting To A Tv Or Monitor Equipped With Color Component; Color Component Output Connectors - Denon DVD-3800 Operating Instructions Manual

I
Color component output connectors (PFVCR, PB/CB and Y)
The red (PR/CR), blue (PBKB) and brightness (Y) signals are output independently, achieving more faithful
reproduction of the colors.
l
The color component input connectors may be marked differently on some TVs or monitors (PR,
PB
and Y/R-
Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV's operating instructions.
l
Connect in this way if your TV is compatible with Progressive Scan.
-Fw DVD-3800
El
To power outlet
NOTES:
l
Use the three commercially available video cords to connect the DVD-3800's color component output connectors to the TV or
monitor.
l
Set the "TV TYPE" in "VIDEO SETUP" In "SETUP" to comply with your TV's video format. When the TV is NTSC formated set to
NTSC. (See page 28)
l
Set the "VIDEO OUT" in "VIDEO SETUP" in "SETUP" to comply with Progressive TV. (NTSC formated only)
l
To use with Z-channel audio output, set "2 CHANNEL" in "AUDIO CHANNEL" in "AUDIO SETUP" in "SETUP" at the initial
settings. (See page 30)
l
Set the "TV ASPECT" in "VIDEO SETUP" in "SETUP" to comply with your TV's aspect. (See page 28)
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE "STANDARD DEFINITION" OUTPUT.
11