Using The Pure Direct Mode - Denon DVD-3800 Operating Instructions Manual

0
10 USING THE PURE DIRECT MODE
n
In the pure direct mode, only analog audio signals (no video signals, etc.) are output, thereby achieving high quality sound
Press the P.D.MEMORY button on the remote control unit.
l
The output status of the video signals, etc., can be stored at
MODE1 and MODE2 as desired.
Remote control unit
Use the A and 7 cursor buttons to select the mode, then press the
ENTER button.
DIGITAL OUTPUT
ON: Digital audio signals are output.
OFF: Digital audio signals are not output.
ON: Video signals are output.
OFF: Video signals are not output.
Remote control unit
ON: It is indicate in Display of the main unit.
OFF: It is not indicate in Display of the main unit.
Press the P.D.MEMORY button on the remote control unit.
l
All of the settings are stored in the memory.
Switch the PURE DIRECT switch on the main unit.
All signals are output normally.
MODE 1:The settings stored for MODE 1 are used.
The factory default settings are:
"DIGITAL OUT": "ON"
"VIDEO OUT": "ON"
"DISPLAY": "ON"
MODE 2:The settings stored for MODE 2 are used.
The factory default settings are:
"DIGITAL OUT": "ON"
"VIDEO OUT": "ON"
"DISPLAY": "ON"
Main unrt
43