Connections; Connecting To A Tv; S-Video Output Connector - Denon DVD-3800 Operating Instructions Manual

0
4 CONNECTIONS
I
NOTES:
l
Read the manuals of all the components when making
l
Be sure to connect the left and rrght channels properly, L
connections. (left) to L, R (rrght) to R.
l
Keep the power cord unplugged until all connections have
l
Plug the power cord securely Into the power outlet.
been completed. Incomplete connection may result in noise.
l
If the power is on when connections are made, noise may
l
Binding the power cord together with connection cords may
be generated and damage the speakers. result in humming or noise.
l
Use the included audio video cord to connect the TV's video input connector and audio input connectors to the DVD-3800's VIDEO OUT
or S-VIDEO OUT and AUDIO OUT
DVD-3800
(VIDEO IN
s-w~ywr-g,, TV
To power outlet
S-Video output connector
The video signals are divided into color (C) and brightness
(Y) signals, achieving a clearer picture.
If the TV is equipped with an S-Video input connector, we
recommend connecting it to the DVD-3800's S-Video
output connector using a commercially available S-Video
connection cord.
NOTES:
l
Connect the DVD-3800's video outputs to the TV either
l
To use with Z-channel audio output, set "2 CHANNEL" in
directly or through an AV amplifier. Do not connect it via a "AUDIO CHANNEL" in "AUDIO SETUP" in "SETUP" at the
VCR (video cassette recorder). Some discs contarn copy
initial settings. (See page 30)
prohibit signals. If such discs are played via a VCR, the copy
l
Set the "TV ASPECT" In "VIDEO SETUP" in "SETUP" to
prohibit system may cause disturbance in the picture. comply with your TV's aspect. (See page 28)
l
Set the "TV TYPE" in "VIDEO SETUP" in "SETUP" to
l
To use with video out or s-video output, set "INTERLACED"
comply with your TV's video format. When the TV is NTSC
in "VIDEO OUT" in "VIDEO SETUP" in "SETUP" at the
formated set to NTSC. (See page 28) initial settings. (See page 28)
IO