Changing The Default Settings - Denon DVD-3800 Operating Instructions Manual

0
8 CHANGING THE DEFAULT SETTINGS
n
Make the initial settrngs to suit your usage conditrons before starting playback.
The initial settrngs are retained untrl they are next changed, even if the power is turned off.
Turn on the power
e Press the power button, the power indicator lights and the power
Marn unrt Remote contr
In the stop mode, press the SETUP button.
settings) screen appears.
nus, the rnrtral values can be changed during playback.
language to be used when playrng the disc.
not offered on that disc, the discs default language
IS
set.
Use this to set the language for the default setting screen and
on the TV screen ("PLAY", etc.).
VIDEO SETUP
Remote control unit
Use this to set the DVD-3800's screen mode. (TV aspect and TV type.)
Use this to set the DVD-3800's audio output mode.
(Digrtal and LPCM output settings.1
Use this to disable playback of adult DVDs so that children cannot watch
them. Note that playback of adult DVDs cannot be disabled rf the rating
level
IS
not recorded on the DVD, but that It
IS
possible to disable
playback of all DVDs.
These Include specral settings CAPTIONS and COMPRESSION.
and ) cur-sor buttons to select the desired setting
I
em,
then press the ENTER button
Select "DISC SETUP". (See page 23.)
Select "OSD SETUP". (See page 26.1
Select "VIDEO SETUP". (See page 27.)
Select "AUDIO SETUP". (See page 30.)
Select "RATINGS". (See page 34.)
Select "OTHER SETUP" (See page 36.)
Remote control unrt Remote contr
C To exit the setup mode
Use the 7 cursor button to select "EXIT SETUP", then press the ENTER button. It
IS
also possible to quit by pressing the
button on the remote contr-ol unrt.
\
01 unit