Setting The Date And Time - Sharp AL-2051 Operation Manual

SETTING THE DATE AND TIME

Following to the language setting, Date and Time setting screen appears. Set the
date and time by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
number.
The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/
Month/Year" or "Year/Month/Day" can be selected for the order of display of the
date.
Use the following procedure to set the date and time:
1
Enter the year (two digits), month (two digits), and day (two
digits) with the numeric keys.
Year Month Day
The year can be entered from 2010.
2
Enter the time (hour (two digits) and minute (two digits)) with
the numeric keys.
Enter the hour in the following range:
When 12-hour format is selected: 01 to 12
When 24-hour format is selected: 00 to 23
3
Press the [
select "AM" or "PM".
When 24-hour format is selected, do not perform this step.
4
Press the [OK] key.
ENTER DATE (2010-)
2011/01/02
] key ( ) or [
) and re-enter the
] key ( ) to
11