Sharp AL-2051 Operation Manual page 87

Key operator programs
When "YES, NO" appears in the "Settings" column, "YES" is selected when a
checkmark appears in the checkbox of the item, and "NO" is selected when
checkmark does not appear.
Default settings
Item
Prohibit Test
YES, NO
Page Printing
Disable
Default
YES, NO
Setting
Changes
Interface settings
Item
Hexadecimal
YES, NO
Dump Mode
I/O Timeout 1- 60 - 999 (sec)
Emulation
Auto*, PCL
Switching
Switch at End of
Port Switching
Job, Switch after
Method
I/O Timeout
Settings
This setting is used to prohibit printing of a
printer test page.
This setting is used to prohibit changes to the
default condition settings.
Settings
This program is used to print out the print data
from the computer in hexadecimal and in the
corresponding text characters (based on ASCII
code). This allows you to check whether or not
print data is being correctly sent from the
computer.
During reception of a print job, if remaining
data is not received after the time set here
elapses, the port connection is broken and the
next print job is begun.
Select the printer language. When [Auto] is
selected, the language is automatically
selected from the data sent to the printer.
Unless errors occur frequently, do not change
the setting from [Auto] to another setting.
Select the method for switching network ports.
PRINTER FUNCTIONS
Description
Description
85