Sharp AL-2051 Operation Manual page 135

Program
Program name
number
12 MARGIN WIDTH
MEM. FOR
13
PRINTER
AUTO KEY
14
REPEAT
15 KEY PRESS TIME
KEY TOUCH
16
SOUND
SOUND AT
17
DEFAULT
TONER SAVE
18
MODE
19 AE LEVEL ADJUST
Setting codes
(factory default
setting appears
in bold)
1: 5 mm
• Use this setting to set the
2: 10 mm
3: 15 mm
4: 20 mm
1: 30%
• Use this to change the
2: 40%
3: 50%
4: 60%
5: 70%
• Use this setting to select
1: ON
2: OFF
• Use this setting to select how
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
1: LOW
• This sets the volume of beep
2: HIGH
3: OFF
• Use this to sound a beep
1: ON
2: OFF
• This mode reduces toner
1: ON
2: OFF
• This is used to adjust the
1: SPF/RSPF
• The automatic exposure level
(Adjustment to
5 levels is
possible)
2: DOCUMENT
GLASS • For the procedure for
(Adjustment to
5 levels is
possible)
USER SETTINGS
Explanation
margin width.
proportion of machine memory
used for printer mode.
whether or not holding down a
key causes repeated input of
the key. For keys that normally
cause a set value to increase
when held down (for example,
holding down the [
( ) or [ ] key (
program can be used to have
the set value not change when
the key is held down.
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
signals. (p.137)
when a base setting is
selected. (p.137)
usage by about 10% when
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
exposure level.
can be adjusted separately for
the document glass and the
RSPF.
adjusting the exposure and
guidelines for numeric values,
see page 26. The factory
default setting for the
exposure level is "center".
] key
)), this
133