Sharp AL-2030 Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. All in One Printer
  5. AL-2030
  6. Operation manual

Sharp AL-2030 Operation Manual

Digital multifunctional system
Hide thumbs Also See for AL-2030:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
AL-2030
AL-2040CS
MODEL
AL-2030
AL-2040CS
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
Page
4
7
14
19
46
52
57
61
69

Advertisement

Table of Contents
loading

Related Manuals for Sharp AL-2030

Summary of Contents for Sharp AL-2030

  • Page 1: Table Of Contents

    AL-2040CS DIGITAL MULTIFUNCTIONAL INTRODUCTION SETTING UP THE UNIT LOADING PAPER INSTALLING THE SOFTWARE MAKING COPIES SPECIAL FUNCTIONS AL-2030 MAINTENANCE TROUBLESHOOTING THE UNIT APPENDIX AL-2040CS MODEL AL-2030 SYSTEM OPERATION MANUAL Page...
  • Page 2 FOR YOUR PROTECTION... To aid in reporting this unit in case of loss or theft, please record below the model number and serial number located on the back of the unit. We also suggest you record all the information listed and retain for future reference. MODEL NUMBER DATE OF PURCHASE Dealer...

  • Page 3: Cautions On Using

    CAUTIONS Caution label on the unit The label ( ) in the fusing area of the unit indicates the following: : Caution, risk of danger Cautions on using Follow the cautions below when using this unit. Warning: • The fusing area is hot. Exercise care in this area when removing misfed paper. •...

  • Page 4: Trademark Acknowledgements

    States and other countries. • IBM, PC/AT, and PowerPC are trademarks of International Business Machines Corporation. • Sharpdesk is a trademark of Sharp Corporation. • All other trademarks and copyrights are the property of their respective owners. For users in the USA Products that have earned the ENERGY STAR protect the environment through superior energy efficiency.
  • Page 5 INTRODUCTION USING THE MANUALS ... 4 PART NAMES ... 5 OPERATION PANEL... 6 SETTING UP THE UNIT SETUP PROCEDURE ... 7 CHECKING PACKED COMPONENTS AND ACCESSORIES ... 8 PREPARING THE UNIT FOR INSTALLATION ... 8 INSTALLING THE TD CARTRIDGE ... 10 POWER ON ...

  • Page 6: Introduction

    Provides instructions on how to solve driver or software problems. Conventions used in this manual and online manual • This operation manual explains the operation of the AL-2030 and AL-2040CS models. In cases where the operation is the same, the AL-2040CS is used.

  • Page 7: Part Names

    PART NAMES Original guide Peep hole Exit area Document feeder tray Document glass Operation panel Front cover Paper tray 1 Paper tray 2 (AL-2040CS only) Multi-bypass tray Side cover Side cover open button Bypass tray paper guides Document feeder cover Interface connector TD cartridge...

  • Page 8: Operation Panel

    OPERATION PANEL Original to copy key and indicators* Exposure mode selector key and indicators Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p.49) Light and dark keys and indicators Use to adjust the MANUAL or PHOTO exposure level.

  • Page 9: Setting Up The Unit

    SETTING UP THE UNIT Follow the installation procedure below to use the unit properly. If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.61). SETUP PROCEDURE When using the unit for the first time, setup the unit following the procedure shown below.

  • Page 10: Checking Packed Components And Accessories

    CHECKING PACKED COMPONENTS AND ACCESSORIES Open the carton and check if the following components and accessories are included. If anything is not included or is damaged, contact our Technical Assistance Department at 1-(630)378-3590 in the USA. Operation manual Software CD-ROM TD cartridge PREPARING THE UNIT FOR INSTALLATION Be sure to hold the handles on...
  • Page 11 Lock To lock the scan head locking switch, hold up the catch in illustration turn the center knob counter-clockwise 90 degrees until you hear a click. AL-2040CS AL-2030 , the unit will not operate. Unlock the switch ( Unlock...

  • Page 12: Installing The Td Cartridge

    INSTALLING THE TD CARTRIDGE Open the multi-bypass tray, and then open the side cover. Remove the CAUTION tape from the front cover and remove the two protective pins from the fusing unit by pulling the strings upward one at a time. CAUTION tape Push gently on both sides of the front cover to open the cover.
  • Page 13 Gently insert the TD cartridge until it locks in place while pushing the lock release button. Close the front cover and then the side cover by pressing the round projections near the side cover open button. When closing the covers, be sure to close the front cover securely and then close the side cover.

  • Page 14: Power On

    POWER ON Ensure that the power switch of the unit is in the OFF position. Plug the other end of the power cord into the nearest outlet. Turn the power switch on the left side of the unit to the "ON" position. The start ( which show the initial settings of the operation panel will also light up to indicate the ready condition.
  • Page 15 Initial settings of operation panel When the unit power is on, the operation panel will revert to the initial settings when the time set with the "Auto clear time" setting (p.55) elapses after a job is finished, or when the clear key is pressed twice. The initial settings of the operation panel are shown below.

  • Page 16: Loading Paper

    Follow the steps below to load paper into the tray. PAPER For best results, use only paper recommended by SHARP. Type of paper feeding Paper tray Standard paper Multi-bypass Standard paper and tray thick paper Special media *1 Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials.

  • Page 17: Loading The Paper Tray

    LOADING THE PAPER TRAY Raise the handle of the paper tray and pull the paper tray out until it stops. Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray.
  • Page 18 Fan the paper and insert it into the tray. Make sure the edges go under the corner hooks. Do not load paper above the maximum height line ( the line will cause a paper misfeed. Gently push the paper tray back into the unit. •...

  • Page 19: Bypass Feed (Including Special Paper)

    BYPASS FEED (including special paper) The multi-bypass tray can be used to feed standard paper, transparency film, labels, envelopes, and other special purpose paper. Paper measuring from 3-1/2" x 5-1/2" to 8-1/2" x 14" and in the weight range of 14 lbs. to 34.5 lbs. (52g/m be used in this tray.
  • Page 20 Set the paper guides to the paper width. Insert the paper (print face down) all the way into the multi-bypass tray. • Paper must be fed narrow side into the feed slot. • Special papers such as transparency film, labels, and envelopes •...

  • Page 21: Installing The Software

    SOFTWARE The CD-ROM that accompanies the machine contains the following software: Printer driver (AL-2030) The printer driver enables you to use the printer function of the machine. The printer driver includes the Print Status Window. This is a utility that monitors the machine and informs you of the printing status, the name of the document currently being printed, and error messages.

  • Page 22: Before Installation

    BEFORE INSTALLATION Hardware and software requirements Check the following hardware and software requirements in order to install the software. Computer type Operating system* Display Hard disk free space 150 MB or more Other hardware requirements *1 Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled model standardly equipped with a USB port.

  • Page 23: Installing The Software

    INSTALLING THE SOFTWARE • If you need to use a different connection method after installing the software using a USB or network connection, you must first uninstall the software and then install it using the new connection method. • In the following explanations it is assumed that the mouse is configured for right hand operation.
  • Page 24 AL-2030 To install all of the software, click the "Standard" button and go to step 12. To install particular packages, click the "Custom" button and go to next step. Click the "Printer Driver" button. Click the "Display Readme" button to show information on packages that are selected.
  • Page 25 "Next" button. Follow the on-screen instructions. When "The installation of the SHARP software is complete." appears, click the "OK" button and go to step 12. If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway"...
  • Page 26 In Windows 98/Me/2000, if the following screen appears, click the "Skip" button or the "Continue" button as appropriate to continue the Sharpdesk installation. If "Skip" is selected, the Sharpdesk installation will continue without installing Sharpdesk Imaging. If "Continue" is selected, Sharpdesk Imaging will be installed.

  • Page 27: Connecting A Usb Cable

    Connecting a USB cable Follow the procedure below to connect the machine to your computer. A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the appropriate cable for your computer. • USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled.
  • Page 28 Double-click the "setup" icon ( The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button. You can show the "SOFTWARE LICENSE" in a different language by selecting the desired language from the language menu. To install the software in the selected language, continue the installation with that language selected.
  • Page 29 • The "Ethernet Address" is indicated on the left side of the machine near the LAN connector. • If the machine is used on a different network after the IP address is set, the machine will not be recognized. Enter the Ethernet Address and click the "Initialize"...
  • Page 30 Read the message in the "Welcome" window and then click the "Next" button. Select "LPR Direct Print" and click the "Next" button. The printer or printers connected to the network will be detected. Click the printer to be configured (the machine) and click the "Next" button.
  • Page 31 If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes". When "The installation of the SHARP software is complete." appears, click the "OK" button. When the "Finish" screen appears, click the "Close" button.
  • Page 32 Click the "Printer Driver" button. Click the "Display Readme" button to show information on packages that are selected. Select "Connected via the network" and click the "Next" button. Click the "Add Network Port" button. Select the network printer that is shared and click the "OK"...
  • Page 33 In the printer port selection window, verify the network printer that is shared and whether the machine is to be used as the default printer, make the selections and click the "Next" button. Follow the on-screen instructions. If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway"...
  • Page 34 Select "Shared Printer" and click the "Next" button. For the port to be used, select the machine set as a shared printer, and click the "Next" button. You can also click the "Add Network Port" button and select the printer to be shared (the machine) by browsing the network in the window that appears.

  • Page 35: Indicators On The Operation Panel

    INDICATORS ON THE OPERATION PANEL The ONLINE indicator and the start ( scanner. SCAN indicator ONLINE indicator Start indicator Indicates the unit is ready for copying or scanning is being performed. Blinking: The indicator blinks in the following situations: • When a print job is interrupted. •...

  • Page 36: Using The Printer Mode

    Click "Control Panel", select "Printers and Other Hardware", and then click "Printers and Faxes". On Windows 98/Me/2000, select "Settings" and click "Printers". Click the "SHARP AL-xxxx" printer driver icon and from the "File" menu select "Properties". Click "Printing Preferences" button in the "General" tab.

  • Page 37: How To Print

    Open the document you intend to print, and select "Print" from the application's "File" menu. Make sure that "SHARP AL-xxxx" is selected as the current printer. If you intend to change any print setting, click the "Preferences" button to open the setting dialog.

  • Page 38: Using The Scanner Mode

    SC6". Click the "Select an event" button and select "ScanMenu SC2" from the pull-down menu. Select "Sharp Button Manager P" in "Start this program" and click "Apply". Do the same for each ScanMenu through "ScanMenu SC6". When the settings have been completed, click the "OK" button to close the screen.
  • Page 39 SC6". Click the "Scanner events" and select "ScanMenu SC2" from the pull-down menu. Select "Sharp Button Manager P" in "Start this program" and click "Apply". Do the same for each ScanMenu through "ScanMenu SC6". When the settings have been completed, click the "OK" button to close the screen.
  • Page 40 Scan Button Destination Setting Dialog Box After you have completed the Button Manager settings in Windows, configure the scan settings in Button Manager. To configure the scan settings in Button Manager, right click the ( ) icon in the Taskbar and select "Setting" from the menu that appears.
  • Page 41 Windows OS The settings for the Windows Event Manager for the SHARP AL-2040CS device allow the user to take advantage of the Sharp Button Manager to take control of events from Windows and send scanned images to any application that can be selected in Button Manager.
  • Page 42 Windows 98, Windows Me, Windows 2000 and Windows XP. Windows Platforms provide a mechanism for software to handle external events for a scanner device like the SHARP AL-2040CS products. This mechanism is controlled by the device manager on a device basis. Applications that can handle events from a scanner/camera device register with the Windows Event Manager and shown as available in the registered applications.
  • Page 43 Using the SCAN key to begin scanning • Scanning is not possible during a copy job. • If the SCAN ( stored. • When scanning an original that has been placed in the SPF, only one original can be placed unless you are using Sharpdesk. Press the SCAN ( The unit enters scan mode.
  • Page 44 Press the start ( Scanning will start and the scanned data will be transferred to the application. • If the following screen appears, select Button Manager and click "OK". Button Manager starts and the application associated with Button Manager starts. If you want only Button Manager to start in this case, set up Button Manager for use in Windows as explained in "Setting up the...
  • Page 45 (p.47). After starting Sharpdesk, click the "File" menu and select "Select Scanner". Select "SHARP MFP TWAIN P", and click the "Select" button. If you use more than one scanning device, select the scanner you want to use through the application. The method for accessing the "Select Scanner"...
  • Page 46 Panel", and click "Printers and Other Hardware", and then click "Scanners and Cameras" in the start menu. Click the "SHARP AL-2040CS" icon and click "Get picture" in "Imaging Tasks". The "Scanner and Camera Wizard" appears. Click "Next" and establish the basic settings for scanning.

  • Page 47: How To Use The Online Manual

    To close the online manual, click the ( the window. • The online manual can be printed out using Acrobat Reader. SHARP recommends printing out the sections which you refer to frequently. • Refer to "Help" of Acrobat Reader for more details on the operation and function of Acrobat Reader.

  • Page 48: Making Copies

    This chapter explains basic and other copying functions. The unit is equipped with a one-page memory buffer. This memory allows the unit to scan an original once only and make up to 99 copies. This feature improves workflow, reduces operation noise from the copier, and provides higher reliability by reducing wear and tear on the scanning mechanism.

  • Page 49: Original Placement

    • If you start a print job while a copy job is in progress, the print job will begin when the copy job is completed. • The scanning function cannot be used while a copy job is in progress. (AL-2040CS only) About interrupt copying If you press the start ( ) key to begin a copy job while a print job using the paper...

  • Page 50: Using The Spf

    Using the SPF The SPF is designed to hold up to 50 originals measuring from 5-1/2" x 8-1/2" to 8-1/2" x 14" and weighting from 14 lbs. to 23.9 lbs. (52g/m • Before feeding originals in the document feeder tray, be sure to remove any staples or paper clips from them.

  • Page 51: Set The Copy Quantity

    SET THE COPY QUANTITY Set the number of copies using the two copy quantity ( from the document glass or copying from SPF. • Press the clear key to clear an entry if a mistake is made. • A single copy can be made with the initial setting, i.e., when "0" is displayed.

  • Page 52: Automatic Exposure Adjustment

    Automatic exposure adjustment This automatic exposure level will remain in effect until you change it again by this procedure. The automatic exposure level can be adjusted to suit your copying needs. This level is set for copying from the document glass and copying from the SPF respectively. When adjusting the automatic exposure level for copying from the SPF, place an original in the document feeder tray and make sure that the SPF indicator lights up.

  • Page 53: Reduction/Enlargement/Zoom

    REDUCTION/ENLARGEMENT/ZOOM Three preset reduction ratios and two enlargement ratios can be selected. The zoom function enables copy ratio selection from 25% to 400% in 1% increments. (When the SPF is being used, the zoom copy ratio range is 50% to 200%.) Set the original and check the paper size.

  • Page 54: Special Functions

    This chapter describes the special functions of this unit. Use these functions as needed. TWO SIDED COPYING (AL-2040CS only) When copying from one-sided originals to two-sided copies, copying orientation can be selected between Turn on Long Edge and Turn on Short Edge. When making two-sided copies, the multi-bypass tray cannot be used.
  • Page 55 Making two-sided copies Place the original(s) on the document glass or in the SPF. (see "ORIGINAL PLACEMENT" (p.47). Select two-sided copy mode. When copying in a one-sided to two-sided mode: Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge).

  • Page 56: Description Of Other Special Functions

    DESCRIPTION OF OTHER SPECIAL FUNCTIONS Toner save mode Reduces toner consumption by approximately 10%. Power save modes The unit has two power save modes of operation: preheat mode and auto power shut-off mode. Preheat mode When the unit enters the preheat mode, the power save ( and other indicators will remain on or off as before.

  • Page 57: User Programs

    To enter the toner save mode, press the light ( ) key. The light and dark indicator marked "1" will light up, indicating the toner save mode is selected. Press the exposure mode selector key. The PHOTO ( will stop blinking and light up steadily. The light and dark indicator marked "3"...

  • Page 58: Displaying Total Number Of Copies

    Program SPF automatic original discharge time Resolution of AUTO & MANUAL mode Reset factory Prevention of OC copies when the SPF is up function Copy effective paper width setting function (Bypass tray) Copy effective paper width setting function (Tray 1) Copy effective paper width setting function (Tray 2)

  • Page 59: Maintenance

    This chapter describes how to replace the TD cartridge and drum cartridge and how to clean the unit. Be sure to use only genuine SHARP parts and supplies. TD CARTRIDGE REPLACEMENT The TD cartridge replacement required ( needed. For more information on purchasing the TD cartridge, see "ABOUT SUPPLIES AND OPTIONS"...

  • Page 60: Drum Cartridge Replacement

    Close the front cover and then the side cover by pressing the round projections near the side cover open button. The indicator ) will go out and the start ( When closing the covers, be sure to close the front cover securely and then close the side cover.

  • Page 61: Cleaning The Unit

    CLEANING THE UNIT Proper care is essential in order to get clean, sharp copies. Be sure to take a few minutes to regularly clean the unit. Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal electrical components or high-temperature parts of the fusing unit, creating a risk of fire or electrical shock.

  • Page 62: Transfer Charger

    Transfer charger If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure. Turn the power switch off. (p.13) Ensure that the multi-bypass tray is open and then open the side cover while pressing the side cover open button. Take the charger cleaner out by holding the tab.

  • Page 63: Troubleshooting The Unit

    TROUBLESHOOTING THE UNIT This chapter describes misfeed removal and troubleshooting. For problems with the printer function or the scanner function, see the online manual or the Help file for the printer/scanner driver. TROUBLESHOOTING If any problem occurs, check the list below before contacting our Technical Assistance Department.

  • Page 64: Status Indicators

    When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the relevant page. Be sure to use only genuine SHARP parts and supplies. Indication Drum replacement...

  • Page 65: Misfeed Removal

    MISFEED REMOVAL When the misfeed ( ) indicator blinks or stop because of a misfeed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( will remain off. For a misfeed of originals in the SPF, see "E: Misfeed in the SPF" (p.67).

  • Page 66: A: Misfeed In The Paper Feed Area

    A: Misfeed in the paper feed area Gently remove the misfed paper from the paper feed area as shown in the illustration. When the misfeed ( blinks, and the misfed paper is not seen from the paper feed area, pull out the paper tray and remove the misfed paper. If the paper cannot be removed, proceed to "B: Misfeed in the fusing area".
  • Page 67 B: Misfeed in the fusing area Lower the fusing unit release lever. Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area".
  • Page 68 C: Misfeed in the transport area Lower the fusing unit release lever. See "B: Misfeed in the fusing area" (p.65). Open the front cover. To open the front cover, see "INSTALLING THE TD CARTRIDGE" (p.10). Rotate the roller rotating knob in the direction of the arrow and gently remove the misfed paper from the exit area.
  • Page 69 E: Misfeed in the SPF An original misfeed may occur at one of three locations: if the misfed original is seen from the document feeder tray, (A) in the document feeder tray; if the misfed original is not seen from the document feeder tray, (B) in the exit area or (C) under the document feeder cover.

  • Page 70: If An Original Misfeed Occurs While Using The Spf

    IF AN ORIGINAL MISFEED OCCURS WHILE USING THE SPF If a misfeed occurs in the machine when the SPF is used, the SPF will automatically stop scanning. Manually remove the misfed original. You can check the number of originals that must be returned to the document feeder tray in the display on the operation panel.

  • Page 71: Appendix

    Copier 600 x 600dpi (Photo mode) Resolution Printer 600dpi Scanner Scan 256 levels Gradation Output 2 levels APPENDIX AL-2030 Available - Cable required (USB or LAN) Available - Cable required (USB only) 250 sheets x 2 600 x 1200dpi AL-2040CS...
  • Page 72 *8 Not including TD and drum cartridges. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

  • Page 73: About Supplies And Options

    When ordering supplies, please use the correct part numbers as listed below. Be sure to use only genuine SHARP parts and supplies. For best copying results, be sure to use only SHARP Genuine Supplies which are designed, engineered, and tested to maximize the life and performance of SHARP copiers.

  • Page 74: Moving And Storing The Unit

    MOVING AND STORING THE UNIT Moving instructions When moving the unit, follow the procedure below. When moving this unit, be sure to remove the TD cartridge in advance. Turn the power switch off and remove the power cord from the outlet.
  • Page 75 The shipment of the defective unit will be at your expense; please be sure it is insured and packaged securely. Upon repair of your unit, Sharp will promptly return it to you at any U.S. location. What You Must Do Your Product is designed to perform with a minimum amount of user maintenance.
  • Page 76 Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.

  • Page 78: Material Safety Data Sheet

    Emergency telephone number Canada Sharp Electronics of Canada Ltd. Telephone number for information Emergency telephone number Australia Sharp Corporation of Australia PTY. Ltd. No1 Huntingwood Drive Huntingwood Blacktown N.S.W. Telephone number for information Germany Sharp Electronics (Europe) GMBH Sonninstrasse 3, 20097 Hamburg...
  • Page 79 MATERIAL SAFETY DATA SHEET 3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of fibrosis will occur.
  • Page 80 8.EXPOSURE CONTROLS / PERSONAL PROTECTION Engineering Measures Ventilation Exposure Limit Values OSHA-PEL(USA) ACGIH-TLV(USA) Personal Protective Equipment Respiratory Protection Hand Protection Eye Protection Skin Protection Other Protective Equipment 9.PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical State : Solid Boiling / Melting Point Softening Point(°C) Flash Point(°C) Ignition Point(°C )
  • Page 81 MATERIAL SAFETY DATA SHEET and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats. Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m...
  • Page 82 Emergency telephone number Canada Sharp Electronics of Canada Ltd. Telephone number for information Emergency telephone number Australia Sharp Corporation of Australia PTY. Ltd. No1 Huntingwood Drive Huntingwood Blacktown N.S.W. Telephone number for information Germany Sharp Electronics (Europe) GMBH Sonninstrasse 3, 20097 Hamburg...
  • Page 83 MATERIAL SAFETY DATA SHEET 3.HAZARDS IDENTIFICATION Most Important Hazards and Effects of the Products Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner. When used as intended according to instructions, studies do not indicate any symptoms of fibrosis will occur.
  • Page 84 Exposure Limit Values OSHA-PEL(USA) ACGIH-TLV(USA) Personal Protective Equipment Respiratory Protection Hand Protection Eye Protection Skin Protection Other Protective Equipment 9.PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical State : Solid Boiling / Melting Point Softening Point(°C) Flash Point(°C) Ignition Point(°C ) Explosion Properties Density(g/cm³) Solubility in Water 10.STABILITY AND REACTIVITY...
  • Page 85 MATERIAL SAFETY DATA SHEET Chronic Effect : In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle (4mg/m ) exposure group, but no pulmonary change was reported in the lowest (1mg/m...

  • Page 86: Index

    INDEX Acrobat Reader ... 45 Alarm indicator - Drum replacement required indicator... 6, 58, 62 - Misfeed indicator ... 6, 62, 63 - TD cartridge replacement required indicator... 6, 57, 62 Appendix ... 69 Auto clear time ... 54, 55 Auto power shut-off mode ...
  • Page 87 Making copies ... 46 MFP driver - Print Status Window ... 19 - Printer driver... 19 - Scanner driver ... 19 Misfeed indicator ... 6, 62, 63 Misfeed removal - Fusing area ... 65 - Paper feed area... 64 - SPF ... 67 - Transport area...
  • Page 88 USB interface cable... 25, 71 Using the manuals... 4 Using the printer mode ... 34 Using the scanner mode ... 36 Using the SHARP TWAIN ... 42 Checking the package ... 8 Cleaning the unit - Cabinet ... 59 - Document glass... 59 - SPF ...
  • Page 89 MEMO...
  • Page 90 MEMO...
  • Page 91 Notice for Users in U.S.A. Declaration of Conformity SHARP Digital Multifunctional System, AL-2030/AL-2040CS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 92 SHARP ELECTRONICS CORPORATION 1 Sharp Plaza, Mahwah, New Jersey 07430-1164. www.sharpusa.com PRINTED IN CHINA This manual has been printed using a vegetable-based 2007E soy oil ink to help protect the environment. TINSE1798QSZZ Printed on 100% post-consumer recycled paper...

This manual is also suitable for:

Al-2040csAl 2030 - b/w laser - copierAl 2040cs - b/w laser - all-in-one

Table of Contents