Settings And Programming Required For The Network Scanner Feature - Sharp AL-2051 Operation Manual

SETTINGS AND PROGRAMMING REQUIRED FOR
THE NETWORK SCANNER FEATURE
To use the Network Scanner feature, settings for the SMTP server, DNS server, and
destination addresses must be configured.
To configure the settings, use a computer that is connected to the same network as
the machine to access the machine's Web server. The Web page can be viewed with
your Web browser (Internet Explorer 5.5 or later (Windows), or Netscape Navigator
6.0 or later).
How to access the web page and view help
Use the following procedure to access the Web pages. [Help] can be clicked at the
bottom of the menu frame to view information on the various function settings that
can be operated remotely over the network from the machine's Web pages. For the
settings of each function, see the explanations in Help.
1
Open the Web browser on your computer.
Supported browsers:
Internet Explorer 5.5 or later (Windows)
Netscape Navigator 6.0 or later
2
In the "Address" field of your Web
browser, enter the IP address of
the machine.
When the connection is complete, the
Web page will appear in your Web
browser.
"ABOUT THE WEB PAGE (FOR
USERS)" (p.94)
3
Click [Help] under the menu
frame.
For an explanation of a function or
setting in the Web page, click the
corresponding item in the Help screen.
4
Close the Web page.
When you have finished using the Web
page, click the
top right corner of the page.
(close) button in the
93