Sharp AL-2051 Operation Manual page 109

Editing and deleting programmed transmission destinations
To edit or delete programmed destinations, click [Destination] in the menu frame of
the Web page.
1
Click [Destination] in the menu
frame of the Web page.
2
In the Destinations List, click the
checkbox of the destination that
you want to edit or delete.
3
To edit the selected destination,
click [Edit] at the bottom of the
Destinations List.
The programming screen of the destination
selected in step 2 appears. Edit the
information in the same way as you initially
stored it.
When finished, be sure to click [Submit] to
save your changes.
4
To delete the selected destination,
click [Delete] at the bottom of the
Destinations List.
A message appears asking you to confirm
the deletion. Click [Yes] to delete.
If you attempt to delete a programmed destination in the following
situations, a warning message will appear and deletion will not be
possible.
• The destination is included in a group.
If the destination is being used for a current transmission, cancel the
transmission or wait until it is completed and then delete the destination.
If the destination is included in a group, delete the destination from the
group and then delete the destination.
SCANNER FUNCTIONS
107