Setting The Date And Time - Sharp AM-400 Online Manual

Setting the Date and Time

Setting the Date and Time
The date and time appear in the fax mode display and are printed at the top of
every page you fax. Set the date and time as explained below.
♦
If you will not be using fax mode, the date and time do not need to be set.
♦
Note that the date and time will need to be reset if the machine is
unplugged or a power failure occurs. When the date and time need to be
set, the following messages appear in fax mode:
01/01 12:00
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Enter a two-digit number for the day
("01" to "31").
Example: the 5
•
To correct a mistake, press
46
FAX
COPY SCAN FAX
!
DUPLEX SCAN
FAX
) and then press
.
.
th
DATE/TIME UNSET
MENU
QUALITY CONTRAST
MENU
E-SORT REDIAL
Z A
ZOOM BROADCAST
PRINT STOP ENTER SPEED
ENTER
MENU
.
The currently set
date appears:
Z
.
Display:
FAX SETTING
1: DATE&TIME SET
DATE 01-01-2005
DATE 05-01-2005