Sharp AL-2051 Operation Manual page 103

3
Enter the destination information.
For the settings, see the following table.
4
When you have completed all the entries, click [Submit].
The entries will be stored.
• If you select the "Enable Hyperlink to FTP server to be e-mailed"
checkbox and select a previously stored recipient (p.99) from "E-mail
Destination", an e-mail will be sent to the recipient informing them of
the file format and location of the scanned image data (Scan to FTP
(Hyperlink)). A hyperlink to the file server to which the scanned image
data was sent appears in the e-mail, and the recipient can click the
hyperlink to go directly to the location where the image data is stored.
• Use "Scan Mode" to select a set of previously stored scanning
settings (see "Storing scanning settings - Network Scanning" (p.97)).
The list shows the names of the stored scan modes.
SCANNER FUNCTIONS
101