Video Recording - LevelOne FCS-1020 User Manual

Control Buttons
Play
Stop
Pause
Forward
Snapshot
Record
7.5.

Video Recording

This utility allows you record the video in AVI format files. There are two ways of video
recording – Manual Recording and Scheduled Recording.
Manual Recording
You can manually record the video stream into an assigned video file.
Click "Record" , then the "Record to Disk" window will pop up. Assign the path and file
The "Play" button is an intelligent play user-interface. In the
normal display mode and the IP Network Camera is
disconnected, clicking on the "Play" can make the viewer connect
to the IP Network Camera. In the playback mode, clicking on the
"Play" can play the video in the normal speed.
The "Stop" button is an intelligent play user-interface. In the
normal display mode and the IP Network Camera is connected,
clicking on the "Stop" can make the viewer disconnect the
camera. In the playback mode, clicking on the "Stop" can stop
playing the video.
The "Pause" button provides you a way to pause the current
video display. When the displaying video is paused, click on the
"Play" again to resume the video display.
The "Forward" button to forward the speed of display when
playback the recording file. Click the button at a time will increase
the playing speed one time.
Click "Snapshot" will make the viewer to take a snapshot of the
video and save the picture as a bitmap file to the hard disk. (You
can set the directory for storing these bitmap files at the Section
7.8.)
By clicking on "Record" you can record video manually.
24