LevelOne FCS-1050 User Manual
Day/night ip network camera
Hide thumbs
Also See for FCS-1050:
- User manual (60 pages) ,
- Quick installation manual (14 pages) ,
- Quick installation manual (14 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LevelOne FCS-1050
Summary of Contents for LevelOne FCS-1050
-
Page 1: Before You Use This Product
LevelOne FCS-1050 Day/Night IP Network Camera User’s Manual... -
Page 2: Table Of Contents Package Contents
Before You Use This Product The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. -
Page 3: Table Of Contents
Table of Contents Before You Use This Product..............1 Table of Contents Package Contents ............2 Package Contents ..................3 Installation .....................5 Hardware installation................5 Software installation................6 Initial Access to the Network Camera ............8 How to Use ..................9 Installing plug-in................9 Primary user’s capability ..............11 Administrator’s capability .............. -
Page 4: Package Contents
Package Contents Network Camera FCS-1050 Camera stand Power adapter Software CD I/O terminal block connector - 3 -... -
Page 5: Installation
Installation Hardware installation Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exceed 100 meters in length. Connect the power adapter jack to the Network Camera before plugging in to the power socket. -
Page 6: Software Installation
Software installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. At the end of the hardware installation, users can use Installation wizard included in the product CDROM to find the location of the Network Camera. - Page 7 If users run Installation wizard before the hardware installation, the Network Camera may not be showed on the Installer list. After the hardware installation, users may click on to update the list. Users may click directly on to access the Network Camera in the default browser.
-
Page 8: Initial Access To The Network Camera
Add Password to prevent Unauthorized Access The default Administrator’s password is the MAC Address, which marks at the bottom label of your FCS-1050. The Administrator should immediately implement a new password as a matter of prudent security practice. Once the Administrator’s password is saved, the Network Camera will ask for the user’s name and password... -
Page 9: How To Use
How to Use Authentication After opening the Web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and password. Upon successful authentication, the following figure is displayed. The foreground is the login window and the background shows the message if authentication fails. - Page 10 This plug-in has been registered for certificate and is used to display the video in the browser. Users may click on to proceed. If the web browser does not allow the user to continue to install, check the Internet security option to lower the security levels or contact your IT or networking supervisor for help.