Table of Contents
Advertisement
/
/
/
/
/
Note:
The third stream and 3D positioning require the support of camera.
5.3 Recording and Capturing Pictures Manually
In the live view interface, click
click
to record the live view. The saving paths of the captured pictures and clips
can be set on the Configuration > Local Configuration page. To configure remote
scheduled recording, please refer to Section 7.2.
Note:
The captured image will be saved as JPEG file or BMP file in your computer.
5.4 Operating PTZ Control
Purpose:
In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom
control of the camera.
Note:
To realize PTZ control, the camera connected to the network must support the
PTZ function or a pan/tilt unit has been installed to the camera. Please properly set the
PTZ parameters on RS-485 settings page referring to Section 12.9 RS-485 Settings.
5.4.1 PTZ Control Panel
On the live view page, click
hide it.
Click the direction buttons to control the pan/tilt movements.
User Manual of Network Camera
Click to select the third-party plug-in.
Manually capture the picture.
Manually start/stop recording.
Audio on and adjust volume /Mute.
Turn on/off microphone.
Turn on/off digital zoom function.
Turn on/off 3D positioning function.
on the toolbar to capture the live pictures or
to show the PTZ control panel or click
to
36
Advertisement
Table of Contents
