Table of Contents
Advertisement
4.
Hardware Installation
4.1.
LED and Focusing
The Camera head and its focus ring allow you to modify the aim and focus of the Camera.
To adjust the Camera's focus, rotate the focus ring.
There are two LEDs indicating the camera status.
Monitoring: When someone is viewing the camera, the LED will light.
Ready: When the camera is power on and ready for access, the LED will light.
LED
Green: Monitoring
4.2.
Camera Ports
The Camera features two ports and a Reset button.
Power: The Power port is where you will connect the power adapter.
LAN: The LAN port is where you will connect the Ethernet network cable.
Reset: The Reset button is what you will press if you need to reset the Camera. Insert a paper
clip into the hole. Then press the button and hold it in for five seconds.
LED
Amber: Ready
Focus ring
4
Advertisement
Table of Contents
