Tools
Firmware Version
Firmware Update
Reset to Default
6.3.
Setting Wizard
When you click the "Setting Wizard", a screen will pop up for you to enter the "Administrator
Name" and "Password". The default value is as follows.
Name: "Admin"
Password: "1234"
Display current firmware version.
Click "Firmware Update" to update new firmware for the camera.
You have to wait for a while for the firmware upgrade.
If you want to reset the camera, click this button. The default
settings of the camera are as follows.
Camera Name: "FCS-1020"
IP Address: "192.168.2.3"
Subnet Mask: 255.255.255.0
Administrator Name: "Admin"
Password: "1234"
Video Port: "4321"
Web Port: "80"
19