Using The Administrator Utility - LevelOne FCS-1020 User Manual

100mbps ip network camera

Hide thumbs Also See for FCS-1020:

Table of Contents

Using the Administrator Utility

The Administrator Utility allows users to search and setup the cameras located within the

Intranet or on the Internet. From the utility, users can view all the information of the selected

camera; furthermore, it provides a setting wizard, which can guide users to add the camera to

the network easily and promptly.

There are two ways to run the Administrator Utility as follows.

1. Click "Start", select "Programs\IP Camera\Admin Utility" to run the utility.

2. Click the "IP Camera Admin" icon

to run the utility.

Once the utility is started, it will search all the cameras within the network. To do more settings,

please refer to the description in the following sections.

Table of Contents