6.2.
Detail Setting
When you click the "Detail Setting", a screen will pop up for you to enter the "Administrator
Name" and "Password". The default value is as follows.
Name: "Admin"
Password: "1234"
If the name and password you enter are correct, you can start to setup the camera.
Network Setting
IP Network Camera Name The default camera name is "FCS-1020". It is recommended to
IP Address
name a meaningful name for the camera.
Enter an unused IP Address within the IP address range used on
your LAN. If the IP Address of your LAN is from the 192.168.2.1
14