Table of Contents
Advertisement
8.2.
Camera Setting
Maintenance
Factory Defaults
E-Mail Setting
Receiver
Mails Server
Apply
IP Information
IP Address
To reset the camera, click "Reset to Defaults". Then, follow the
instruction of the screen to complete the process.
Set up the E-Mail account as the receiver for the snapshot
picture.
Specify the SMTP mail server for sending E-Mail.
When you finish the "E-Mail Setting", click "Apply".
Enter an unused IP Address within the IP address range used on
your LAN. If the IP Address of your LAN is from the 192.168.2.1
to 192.168.2.254, you can set an unused IP Address from the
39
Advertisement
Table of Contents
