Table of Contents
Advertisement
21. After all logs are properly positioned, place small "dime size"
pieces of Rockwool (ember material) in the shaded area on
the burner as shown in Figure 50.
Ember Placement - 42" Burner
DVLT36 AND DVLT42 GLASS MEDIA INSTALLATION
Installation of the glass media is critical to safe and clean op-
eration of the fireplace.
Note: Before installing the glass media, see Accent Lamp Light
Replacement section on page 53 of this manual for bulb place-
ment.
34829-1-0115
DVTT42 LOG PLACEMENT
Figure 50
BURNER COVER
PILOT GUARD
MEDIA BASKET
1. Remove the mesh screen and the glass frame assembly.
2.
Place the pilot guard around the pilot.
3.
Place the glass media around the Accent Burner. Fill the me-
dia basket until the glass media covers the burner with only
one layer of glass. Do not place any of the glass media inside
the pilot guard.
4. Remaining glass media should be placed in front of the burner
cover for added ambience when accent light is on.
FRONT BURNER
Figure 51
Page 37
Advertisement
Table of Contents
