I Setting Audio/Squelch Level - Icom IC-V8 Instruction Manual

4
BASIC OPERATION
D Tuning step selection
The IC-V8 has 8 tuning steps— 5, 10,
12.5, 15, 20, 25, 30 and 50 kHz. The tun-
ing step is selectable in
q Push [A•
SET MODE
w Push [Y]/[Z] several times to select
the tuning step item.
e Rotate [VOL] to select the desired tun-
ing step.
r Push [#•

I Setting audio/squelch level

D To set the audio level
Rotate [VOL] to set the desired audio
level while receiving a signal.
• When no signal is received, push and
hold [SQL] while setting the audio level.
• When [VOL] is assigned as tuning dial,
push [Y]/[Z] to adjust the audio output
level. (pgs. 17, 53)
D To set the squelch level
While pushing [SQL], push [Y]/[Z] to
set the squelch level.
• The squelch level "1" is loose squelch,
"10" is tight squelch.
• When [VOL] is assigned as tuning dial,
rotate [VOL] while [SQL] is pushed.
(pgs. 17, 53)
18
SET MODE
] then [8•
FUNC
.
] to exit
ENT
.
] to enter
SET
.
SET MODE
[VOL]
[Y]
[Z]
[A• ]
FUNC
[8• ]
SET
[#• ]
ENT
F
MR
[VOL]
[Y]
[SQL]
[Z]
TX