Table of Contents
Advertisement
7-4-7.FUEL.TANK
(1) Hand tighten the strainer screw as far as
it will go, loosen it again by one or two
rotations (fuel outlet faces down), then
tighten the lock nut .
(2) Mount the fuel tank on the frame with rubber
washers between the tank flange and the
frame .
M6 x 20 mm bolt (black) . . . 4 pcs .
Rubber washer . . . 4 pcs .
NOTE : F or easy tank assembly, glue the
rubber washers over the mounting
holes of the frame.
(3) Connect the rubber pipe .
First, fit the hose clamps on the rubber
pipe and connect it to the strainer and the
carburetor . Then fasten it with the hose
clamps .
NOTE : A pply a drop of oil to the rubber pipe
for easier connection.
FUEL TANK CAP
FUEL FILTER
FUEL
STRAINER
FILTER
PACKING
CUP
RUBBER PIPE
- 46 -
FUEL GAUGE
FUEL TANK
BRACKET
(TANK-A)
M6 × 16 BOLT
Advertisement
Table of Contents
