Robin America RGX7100 Service Manual page 35

(6) Remove the rear cover .
RGX7100 M6 × 180mm . . . 4 pcs .
RGX7800 M6 × 195mm . . . 4 pcs .
(7) Take out stator cover with crows (2 pcs)
raised up by using screw driver .
(8) Remove the stator .
NOTE : T he stator is heavy. Be careful do not
hit the coil of the stator to the rotor.
(9) Take off the through bolt of the rotor .
(10) Use a bolt and oil as a tool for pulling out
rotor in the following procedures :
1 . Pour engine oil into the center hole of
rotor shaft . Fill with oil to the shaft end .
2 . Prepare a bolt with the following thread
size : M12 × 1 .75 (RGX7100 / RGX7800)
STATOR COVER
- 31 -