Robin America RGX7100 Service Manual page 36

3 . Apply a few turns of seal tape around the
tip of the bolt .
SEAL TAPE
SEAL TAPE
4 . Screw the bolt into the thread of the rotor
shaft .
5 . Torque the bolt using a socket wrench
until the rotor comes off loose .
* The hydraulic pressure inside the rotor
shaft takes apart the rotor from the engine
shaft .
(11) Remove the front cover .
M8 × 20 bolt(countersunk head) . . . 4 pcs .
- 32 -
FRONT COVER