Table of Contents
Advertisement
(11) Tighten the nuts over the mount rubber
bolts to fix .
NOTE : W hen tightening the nuts, slightly lift
the alternator assembly so that the
weight is not applied to the mount
rubbers.
M10 flange nut . . . 2 pcs .
Tightening.torque.:.. . 24.0-30.0. N•m.
NOTE : D o not tighten the nut and the bolt for
Muffler Bracket 1.
After attaching Muffler to the Engine,
the nut and the bolt are fixed.
(12) Set stator cover with the claw inserted into
slit and bent (2 pcs) .
.240-300. kgf•cm.
.(17.8-22.2.ft•lbs)
- 42 -
MOUNT
BASE
Advertisement
Table of Contents
