I Initial Set Mode Items - Icom I706MKTMG Instruction Manual

Q8 RPTR-T SCN
During repeater operation, you can detect the tone
frequency necessary to open a repeater (see p. 30).
Q8 T-SQL SCN
During tone squelch operation, you can detect the
tone frequency necessary to communicate using
tone squelch (see p. 31).

I Initial set mode items

1 MODE SELECT
This item is available in all modes, and allows you to
simplify operation by inhibiting the selection of
unneeded operating modes during normal operation.
For example if you are operating mobile and only
plan on using FM and AM modes, use "MODE
SELECT" to inhibit access to all other modes (SSB,
CW, RTTY, WFM), thereby making selection of AM or
FM quick and easy.
2 BEEP
(confirmation beep)
A beep sounds each time a switch is pushed to con-
firm it. This function can be turned OFF for silent
operation.
3 BAND BEEP
A beep sounds when an operating frequency enters
or exits a transmit frequency range. This functions
independent of the confirmation beep setting (above).
4 BACK LIGHT
The function display backlighting can be set to high,
low or OFF to suit ambient lighting.
5 KEY LIGHT
The key/switch backlighting can be set to high, low or
OFF to suit ambient lighting.
(repeater tone scan)
(tone squelch tone scan)
(all modes)
(band beep)
(display backlighting)
(key/switch backlighting)
FM
The default is 88.5 Hz.
FM
The default is 88.5 Hz.
The default is on for all operating
modes. To toggle an operating mode
on or off, push (or push and hold)
[MODE] one or more times until the
desired mode is displayed, then rotate
the main dial to set on or off.
Confirmation beep ON
(default)
Band beep ON
(default)
Display backlighting set to
high (default).
Display backlighting set to
high (default).
7
SET MODE
Confirmation beep OFF
Band beep OFF
Display backlighting set to
low.
Display backlighting set to
low.
50