Pitch Shift - Roland SBX-1000 Owner's Manual

14: PITCH SHIFT

Shifts the pitch of the original sound. This pitch shift can add two pitch shifted sounds to the original sound.
Knob Parameter
[Knob 1] Pitch 1 [semitone]
[Knob 2] Pitch 2 [semitone]
Pitch Delay BPM
Sync
Pitch Delay Time
[Knob 3] Pitch Feedback
Pitch 1 Pan
Pitch 2 Pan
Pitch 1 Level
Pitch 2 Level
Wet Low Gain
Wet High Gain
Balance
Level
Value Explanation
-24–+12 semi Adjusts the pitch of Pitch Shift 1 in semitone steps.
-24–+12 semi Adjusts the pitch of Pitch Shift 2 in semitone steps.
OFF, ON OFF: Pitch Delay Time specified as numerical value
ON: Pitch Delay Time specified as note value
0–1300 msec, note Adjusts the delay time from the direct sound until the Pitch Shift sound is heard.
-98–+98 % Adjusts the proportion of the pitch shifted sound that is fed back into the effect.
Negative (-) settings will invert the phase.
L64–63R Stereo location of the Pitch Shift 1 sound
L64–63R Stereo location of the Pitch Shift 2 sound
0–127 Volume of the Pitch Shift 1 sound
0–127 Volume of the Pitch Shift 2 sound
-15–+15 dB Amount of boost/cut for the effect sound's lower range
-15–+15 dB Amount of boost/cut for the effect sound's upper range
D100:0W–D0:100W Volume balance between the direct sound (D) and the pitch shifted sound (W)
0–127 Output Level
9