Roland SBX-1000 Owner's Manual page 5

06: LO-FI COMPRESS
This is an effect that intentionally degrades the sound quality for creative purposes.
Knob Parameter
Pre Filter Type
Lo-Fi Type
Post Filter Type
Post Filter Cutoff
Low Gain
High Gain
[Knob 1] Level
07: DISTORTION
Intensely distorts the sound. The tone quality of the distorted sound is adjusted with a filter.
Knob Parameter
Pre HPF
[Knob 1] Drive
Tone Sw
Tone
[Knob 2] Distortion Level
[Knob 3] Dry Level
Value Explanation
1–3 Selects the type of filter applied to the sound before it passes through the Lo-Fi
effect.
1–9 Degrades the sound quality. The sound quality grows poorer as this value is
increased.
OFF, LPF, HPF Type of filter after it passes through the Lo-Fi effect
OFF: no filter is used
LPF: cuts the frequency range above the Cutoff
HPF: cuts the frequency range below the Cutoff
200–8000 Hz Basic frequency of the Post Filter
-15–+15 dB Gain of the low range
-15–+15 dB Gain of the high range
0–127 Output level
Value Explanation
BYPASS, 16–1000 Hz Frequency of the filter that cuts the low-frequency content of the input sound
(BYPASS: no cut)
0–127 Amount of distortion
OFF, ON Switches Tone on/off
0–127 Tone quality of distorted sound
0–127 Volume of distorted sound
0–127 Volume of original sound
5