Roland SBX-1000 Owner's Manual page 16

27: AUTO PAN
Cyclically modulates the stereo location of the sound.
Knob Parameter
Rate BPM Sync
[Knob 1] Rate
[Knob 2] Depth
Low Gain
High Gain
Level
28: ROTARY
The Rotary effect simulates the sound of the rotary speakers often used with the electric organs of the past. Since the
movement of the high range and low range rotors can be set independently, the unique type of modulation characteristic of
these speakers can be simulated quite closely.
Knob Parameter
[Knob 1] Speed
Woofer Slow Speed
Woofer Fast Speed
Woofer Accel
[Knob 2] Woofer Level
Tweeter Slow
Speed
Tweeter Fast Speed
Tweeter Accel
[Knob 3] Tweeter Level
Separation
Level
16
Value Explanation
OFF, ON OFF: Rate specified as numerical value
ON: Rate specified as note value
0–127, note Frequency of the change
0–127 Depth to which the effect is applied
-15–+15 dB Gain of the low range
-15–+15 dB Gain of the high range
0–127 Output Level
Value Explanation
SLOW, FAST Simultaneously switch the rotational speed of the low frequency rotor and high
frequency rotor.
SLOW: Slows down the rotation to the Slow Rate.
FAST: Speeds up the rotation to the Fast Rate.
0–127 Slow speed (SLOW) of the low frequency rotor
0–127 Fast speed (FAST) of the low frequency rotor
0–15 Adjusts the time it takes the low frequency rotor to reach the newly selected
speed when switching from fast to slow (or slow to fast) speed. Lower values will
require longer times.
0–127 Volume of the low frequency rotor
0–127
Settings of the high frequency rotor
0–127
The parameters are the same as for the low frequency rotor
0–15
0–127
0–127 Spatial dispersion of the sound
0–127 Output Level