Step Flanger - Roland SBX-1000 Owner's Manual

Hide thumbs Also See for SBX-1000:
Table of Contents

Advertisement

25: FLANGER
This is a stereo flanger. (The LFO has the same phase for left and right.) It produces a metallic resonance that rises and falls like
a jet airplane taking off or landing.
Knob
Parameter
Pre Delay
Rate BPM Sync
[Knob 1]
Rate
[Knob 2]
Depth
Phase
[Knob 3]
Feedback
Wet Low Gain
Wet High Gain
Balance
Level

26: STEP FLANGER

This is a flanger in which the flanger pitch changes in steps. The speed at which the pitch changes can also be specified in
terms of a note value of a specified tempo.
Knob
Parameter
Pre Delay
Rate BPM Sync
Rate
[Knob 2]
Depth
Phase
[Knob 3]
Feedback
Step Rate BPM Sync
[Knob 1]
Step Rate
Wet Low Gain
Wet High Gain
Balance
Level
Value
Explanation
0.0–100 msec
Adjusts the delay time from when the direct sound begins until the flanger sound
is heard.
OFF, ON
OFF: Rate specified as numerical value
ON: Rate specified as note value
0–127, note
Frequency of modulation
0–127
Depth of modulation
0–180 deg
Spatial spread of the sound
-98–+98 %
Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.
-15–+15 dB
Amount of boost/cut for the effect sound's lower range
-15–+15 dB
Amount of boost/cut for the effect sound's upper range
D100:0W–D0:100W
Volume balance between the direct sound (D) and the flanger sound (W)
0–127
Output Level
Value
Explanation
0.0–100 msec
Adjusts the delay time from when the direct sound begins until the flanger sound
is heard.
OFF, ON
OFF: Rate specified as numerical value
ON: Rate specified as note value
0–127, note
Frequency of modulation
0–127
Depth of modulation
0–180 deg
Spatial spread of the sound
-98–+98 %
Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.
OFF, ON
OFF: Step Rate specified as numerical value
ON: Step Rate specified as note value
0–127, note
Rate (period) of pitch change
-15–+15 dB
Amount of boost/cut for the effect sound's lower range
-15–+15 dB
Amount of boost/cut for the effect sound's upper range
D100:0W–D0:100W
Volume balance between the direct sound (D) and the flanger sound (W)
0–127
Output Level
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Octapad spd-30

Table of Contents