Roland SBX-1000 Owner's Manual page 17

29: REVERB
Choose between 4 different types of basic reverbs.
Knob Parameter
Reverb Type
Pre Delay
[Knob 1] Reverb Time
HF Damp
Wet Low Gain
Wet High Gain
[Knob 2] Level
Value Explanation
ROOM1, ROOM2, Type of reverb
STAGE1, STAGE2
ROOM1: dense reverb with short decay
ROOM2: sparse reverb with short decay
STAGE1: reverb with greater late reverberation
STAGE2: reverb with strong early reflections
0.0–100 msec Adjusts the delay time from the direct sound until the reverb sound is heard.
0–127 Time length of reverberation
200–8000 Hz, BYPASS Adjusts the frequency above which the reverberant sound will be cut.
As the frequency is set lower, more of the high frequencies will be cut, resulting in
a softer and more muted reverberance (BYPASS:no cut).
-15–+15 dB Amount of boost/cut for the effect sound's lower range
-15–+15 dB Amount of boost/cut for the effect sound's upper range
0–127 Output Level
17